Publicidad
Installation behind a double wall switch (without multiway switching).
EN
Do not connect to mains power, only connect the wall switch with the grey
cables of the AWMT-003. When both wires are connected an ON signal will be
transmitted and the LED will light up. When one of the wires is disconnected
an OFF signal will be transmitted. When the wires are the LED will light up.
The transmitter has 2 seperate channels, this way you can use both buttons of
the wall switch seperately.
Instalacija iza dvostrukog zidnog prekidača
SR
Nemojte povezivati glavno napajanje,samo povežite zidni prekidač sa sivim
žicama od AWMT-003! Kada su obe žice povezane, ON signal će biti prosleđen
i LED na uređaju će početi da svetli. Ukoliko dođe do prekida na jednoj od žica
OFF signal će biti prosleđen. Predajnik ima 2 odvojena kanala,tako da na ovaj
način možete da koristite oba dugmeta nezavisno.
10
Publicidad
