Appliance Description; Optional Accessories - Hupfer SPA/EB-1 Manual De Instrucciones

Chapter 3
Page 14
3.4.3

Appliance Description

Mobile bain maries are mobile devices with heated bain-marie wells. They hold up prepared meals in Gas-
tronorm containers and keep them warm.
The bain-marie wells are filled with water and a tubular heating element or a foil heater warm them up. The
generating water vapour heats up the inserted Gastronorm containers. Those models consisting of tubular
heating elements, their bain-marie wells can be heat dried. Heating elements and electrical components are
easy to access and can be dismantled without any problems by authorised specialist staff in order to perform
service work.
The operating temperature is set for each bain-marie well separately. There is a thermostat on the front side
of the mobile bain marie that is used to set the operating temperature variably between 30°C and 95°C for
every bain-marie well.
The shelf is firmly welded onto the continuous pipe frame below the mobile bain-marie well and can be used
as an additional shelf. Only objects with a firm base may be stored on the shelves. Do not move the appli-
ance when there are open containers with hot liquids on it. The permitted total weight of the mobile bain ma-
rie may not be exceeded.
Mobile bain maries are equipped with four swivel castors, two of which have total brakes that prevent the
appliance from moving. Plastic disc bumpers on the swivel castors protect the lateral sides of the appliance
and controls against damages.
Push handles with integrated bumper bar protect the models with frontal operation against injuries to the
hands. Models SPA/EB-2LS and SPA/EB-3LS with front mounted controls have
a plastic bumper with an integrated finger grip arranged above the controls to make it easier to move the ap-
pliances.
3.4.4

Optional accessories

The following parts can be applied as optional accessories for the mobile bain marie:
§
Support bars
Support bars are special elements of stainless steel used in the bain-marie wells. The support bars
are to be used with smaller Gastronorm containers. They do not let the steam escape between the
containers and reduce, subsequently, heat loss.
§
Drain extension tube
The drain extension tube consists of a hose with a threaded connection that is screwed into the water
drain tap as an extension hose. The length of the hose of 420 mm is used because the water can be
drained out of the bain-marie wells even with an inserted shelf without using a drain container.
§
Hinged shelf
Hinged shelves made of stainless steel are designed to hold up crockery items. They can fitted either
on
the lateral side or on the front side of the appliance. Only authorised specialist staff may fix the hinged
shelves to the appliance. To do so, a welding machine is required.
It is not permitted to put heavy loads on to hinged shelves. During transport, they must be folded up.
There is a risk of crushing your fingers when folding up and locking the hinged shelves.
The item code for the special accessories can be found in the spare parts catalogue and online order lists.
Mobile Bain Maries
SPA/EB-1 | SPA/EB-2 | SPA/EB-2F | SPA/EB-2LS | SPA/EB-3 | SPA/EB-3F | SPA/EB-3LS | SPA/EB-4
Description and Technical Data
Appliance Description
4330002_A2