Gude GE 2200 Manual De Instrucciones Original página 9

•
Settings, measurements, cleaning work etc. may only be
carried out when the engine has been switched off and
the spark plug lead disconnected.
•
If safety or protective equipment must be maintained or
repaired, it must be reinstalled correctly without delay on
completion of the work.
•
It is essential that you are familiar with the accident
prevention regulations and all other, general safety
regulations in force at the place of use.
•
Always check the safety equipment before you use the
auger. Ensure that any parts, which appear to be only
slightly damaged, actually function correctly.
•
Check whether all the moving parts function perfectly.
Pay particular attention to damage and jamming parts.
All parts must be correctly installed and satisfy all
conditions for perfect function.
•
Unless otherwise stated in this operating manual,
damaged parts and safety equipment must be repaired
or replaced by an authorised service centre.
•
Have damaged switches replaced by an authorised
service centre.
The auger bit will not start to turn until you press
the throttle, the bit will not turn when the engine is
idling.
Explanation of the symbols
The following symbols are used in this manual and/or on the
machine:
Product safety:
The product complies with
the relevant standards of the
European Community
Instructions:
Read the operating manual
before use
Wear safety gloves
Approved safety
Wear eye and ear
protection
Wear head protection
Wear safety footwear
Warning! Entanglement
hazard.
Keep other people away
from the machine. They
may be injured by foreign
bodies being catapulted out
of it. The minimum safety
distance is 15 m.
Danger of poisoning! Only
use the machine outdoors
and never in enclosed or
poorly ventilated areas.
Environmental protection
Do not dispose of waste in the
environment, dispose of it
correctly
Damaged and/or electrical or
electronic devices for disposal
must be deposited at the
recycling points provided for
them.
Packaging
Protect from moisture
Interseroh recycling
Technical data
Displacement
Speed
Ø
Diameter of auger bit
Noise value
Intended use
Petrol augers are designed to drill single holes in the ground
for inserting posts or for drilling footings for forestry,
gardening and landscaping purposes.
Warning of catapulting
parts.
Cardboard packaging
material can be deposited at
recycling centres.
This way up
Engine power
Fuel/tank capacity
Weight