Settings - Papago GoSafe 318 Manual Usuario

Settings

Press the " " button to enter "Settings".
● GSENSOR
Set the impact sensitivity of the G-sensor. Options include: Low, Medium, High, and OFF.
● Driving Safety:
a. Stop and Go: When activated, after the car is stopped for 10 seconds the device will
start to detect when the car in front has proceeded to go. When the car in front is
driving away, it will give an audio alert to remind you to begin driving.
b. Fatigue Driver: When activated, the user can setup a defined alarm clock, periodically
reminding you to take a rest before continuing to drive. Available options are : 30
minutes/1 hour/2 hours/off.
c. Remind Light : When activated, if driving in a dark environment (such as tunnel or
parking structure), it will have an audio alert and display the light alert icon on the
screen. The alert can be turned on/off.
● Motion Detection:
Recording will start when the function is activated. If there is no movement for more than
60 seconds, recording will be stopped and switched to detection mode. Recording restarts
when dashcam detects movement. The action is repetitive.
This function only works when the device has a continual power source after
the vehicle´s engine is turned off.
English 16