The Wheel Unit; The Pedals; Tuning - FANATEC SPEED STER 3 Manual Del Usario

3.1.2 The Steering Wheel Unit
The steering wheel is fixed to the console. This also houses the start
button and the LED display (right).

3.1.3 The Pedals

The left pedal is the brake and the right pedal acts as the
accelerator. The pedals are pressure-sensitive (analog).

3.2 Tuning

AT T E N T I O N ! The TUNING settings can considerably
influence the drive behavior, both in a positive and negative
way. In particular inadvertent reprogramming of the pedals
can lead to problems.
You can find a list of the recommended settings at
www.Fanatec.com
You reinstate the delivery settings by pressing the
TUNING key to access the TUNUNG mode and then by
pressing the TUNING key again and holding down for
about 10 seconds.
By pressing the "TUNING" button, you switch to Tuning mode,
and can make several settings to adjust the SPEEDSTER
ForceShock™ to the game or to your own driving style.
The settings are displayed in the two-character LED Display.
Menu navigation and setting changes:
1. Press "TUNING"
2. Choose the required function using the
Directional buttons "LEFT" and "RIGHT"
3. To change the setting, press the
Directional buttons "UP" and "DOWN"
4. Press "TUNING" to exit Tuning mode
The settings remain even after switching off the console.
14
® 3