Putting Into Operation; Storage And Recycling - Hupfer Korbstapler KO/50-50 Manual De Instrucciones

Basket
Ocultar thumbs Ver también para Korbstapler KO/50-50:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 78
Transport, Assembly, Putting into Operation and Decommissioning

Putting into Operation

4.3
Putting into Operation
Before the first use of the mobile basket dispenser, the protective plastic film has to be removed from the
metal plates.
INFO
Before putting the appliance into operation, it is necessary to check whether the appliance functions prop-
erly.
The following functions are to be checked separately:
In the mobile appliances: Function of the total brakes.
In the heated appliances: Function of the operating elements and heating.
Before the appliance is put into operation it must be clean and dry.
4.4

Storage and Recycling

Temporary storage must take place in a dry and frost-free environment. The basket dispenser must be kept
covered with a suitable covering material to be protected against dust ingress.
The basket dispenser kept in the storage location must be checked for damages and corrosion every 6
months.
NOTE
Before the appliance is taken back into operation it must be clean and dry.
If the basket dispenser is required to be recycled, all the heating devices (if available) must be removed safe-
ly and completely, the recyclable materials must be separated properly and disposed in an environmentally
compatible manner according to the Waste Disposal Regulations. In any case, the local bodies responsible
for disposal are to be involved for this purpose.
4330007_A0
Disposal of packing material
The packing consists of recyclable materials and can be disposed of appro-
priately. Thereby, the different materials are to be separated and disposed in
an environmentally compatible manner. In any case, the local bodies respon-
sible for disposal are to be involved for this purpose.
Condensed water formation
Ensure that there is sufficient ventilation and no large temperature fluctuations
in the storage location to avoid condensed water formation.
KO/50-50 | KO/65-53 | KO/50-50K | KO/65-53K | KOUH/50-50 | KOUH/65-53 | EBS/50-50 | EBS-T/50-50 | EBSH/50-50 | EBSH-T/50-50
Chapter 4
Page 25
Basket Dispenser

Publicidad

Tabla de contenido
loading

Tabla de contenido