Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
This guide is intended to acquaint you with the safe operation and
maintenance procedures for the Armada Technologies Models
Pro48 and Pro48K multi-function irrigation tester kit. Read this
entire guide before operating the Pro48 or Pro 210F tone probe
found in the kit. Keep this guide available to anyone who may be
required to use these products.
DESCRIPTION
The Pro48K consists of a Pro48 multi-function irrigation tester, a
Pro210F advanced tone probe, and a soft carrying case. The
functions of the Pro48 include:
• Testing voltage/output from the clock/controller.
• Activating solenoids.
• Testing a solenoid or wiring for continuity.
• Chattering a solenoid for lost valve locating.
• Sending tone to identify wires.
The Pro210F Tone Probe is an advanced tone sensing probe for
identifying wires in conjunction with the Pro48 in tone sending
mode.
Safety
Safety is essential in the use and maintenance of Armada tools
and equipment. This instruction manual and any markings on the
tool provide information for avoiding hazards and unsafe practices
related to the use of this tool. Observe all of the safety information
provided.
NEVER CONNECT THE PRO48 TO 120 VOLT POWER SUPPLY
OR HIGHER. THE UNIT WILL BE DAMAGED AND PERSONAL
INJURY OR DEATH MAY OCCUR.
THE PRO48 EMITS A 36 VOLT POWER SOURCE FROM THE
ALLIGATOR CLIPS. DO NOT TOUCH THEM WHILE UNIT IS IN
OPERATION.
2
Publicidad
