Built-In Player; Playing A Disc - Pioneer DEH-2850MP Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
03
Operating this unit

Built-in Player

Playing a disc

3
4
When playing an MP3/WMA/WAV disc
1 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2 Track number indicator
Shows the track (file) currently playing.
! If a track number 100 or more is selected,
d will light up above the last two digits
of the track number.
3 Folder number indicator
Shows the number of folder currently play-
ing.
4 MP3 indicator
Shows when an MP3 file is playing.
5 WMA indicator
Shows when a WMA file is playing.
1
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
EJECT.
8
En
1
2
When playing a CD
1
5
2
2
Press a or b to select a folder when
playing an MP3/WMA/WAV disc.
# You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3
To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on page 10.)
4
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 14.
! There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read, FRMTREAD is displayed.
! When playing discs with MP3/WMA/WAV files
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.
! If you have switched between playback of
MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.
! The built-in CD player can play back an MP3/
WMA/WAV file recorded on CD-ROM. (Refer
to page 14 for files that can be played back.)

Publicidad

Tabla de contenido
loading

Tabla de contenido