Resistance Measuring; Diode Test - Steren MUL-605 Manual Del Usuario

Resistance measuring

Ensure that the circuits haven't energy and the capacitors is discharged to avoid
electrical hazard or damages in the equipment.
1. Set the knob in
2. Press the button until the symbol
(Ω / kΩ / MΩ) appears in the screen.
3. Insert the black connector into the COM
terminal; insert the red connector into
terminal.
4. Touch the circuit with the tips.

Diode test

Be sure that the circuits have not energy and the capacitors are completely dis-
charged to avoid hazard shock or damages in the equipment.
1. Set the knob in
2. Press the button until the symbol
appears in the screen.
3. Insert the black connector into the COM
terminal; insert the red connector into
terminal.
4. Connect the tips to the semiconductor
component: the red to anode and the black
to cathode.
position.
position.
37