Description Of The Appliance; Identification Data; How To Make Coffee - Espressione Moka aroma 1337 Manual Del Usuario

dEscriptioN of thE appliaNcE

A - Drip tray
B - Cup-resting grill
C - Filter holder for ground coffee
D - Thermocream® Disc
E - Perforated silicone disc
F - Thermocream® Filter
G - Machine body
H - Maxi Cappuccino attachment and wand for water
and steam supply
I - Power cord + Plug
J - Coffee measure/presser
K - Pod filter holder

identification data

The following machine identification data are shown on the plate placed underneath the machine's standing
base:
• manufacturer and CE mark
• model (Mod.)
• serial number (SN)
• electrical supply voltage (V) and frequency (Hz)
• absorbed electric power (W)
• assistance toll-free number
Always give the model and serial number to the Authorised Service Centres when requesting assistance.
prElimiNary phasEs for usE
using the appliance for the first time
Check that the voltage of the domestic network is the same as that indicated on the technical information plate
of the appliance. Place the appliance on a stable surface.
Open the tank lid (N). Fill the tank up to the level marked MAX (Fig. 3).
While filling, pay close attention that the water does not dampen the switch area to prevent infiltra-
tions inside the electrical parts.
Insert the plug into the socket, which must be earthed.
starting the first time
After having filled the tank with cool tap water, start the machine by pressing the button (U). Indicator lamps
(V) and (Q) turn on to indicate that the machine is on and that the internal boiler has started to heat up, re-
spectively. Press the coffee dispensing switch (S) until you see water come out of the filter holder seat (Fig. 4).
if you are starting the machine for the first time or after a period of time during which it has not been
used, it is recommended that at least one cup of water be allowed to pass through the boiler's hydrau-
lic circuit. also open the cock (P) by slightly turning it anti-clockwise after having placed a container
underneath the Maxi cappuccino device wand (h).
Then close the cock (P) by turning it clockwise, and press the coffee dispensing switch (S) to make the water
stop coming out. The machine will be ready to make coffee when the indicator lamp (Q) turns off.

hoW to makE coffEE

Put the Thermocream® Disc (D), the perforated silicone disc (E) and the Thermocream® Filter (F) into the
filter holder in the order indicated (Fig. 5). Measure out the coffee in the filter and lightly press with the specially
provided presser: completely fill two measures for two cups of coffee, and fill only one for one cup. Insert the
filter holder into its seat.
6
L - Drain pan
M - Pod filter
N - Tank lid
O - Water tank
P - Steam dispensing cock
Q - Boiler temperature indicator lamp
R - Steam function switch
S - Coffee dispensing switch
T - Coffee dispensing indicator lamp
U - On-off switch
V - "ON" indicator light