Hupfer Powerstapler PSUH Manual De Instrucciones página 39

Section 2
Page 10
§
Release both total locks before moving the appliance. Moving the appliance when the total locks are
engaged can damage the chassis.
§
The appliance may only be transported over level floors. Moving the appliance over very uneven
floors can damage the chassis.
§
It is not permitted to transport the appliance over steep inclines or steps.
§
When approaching walls and moving round obstacles, always be aware for persons in your path. Risk
of injury.
§
To transport the appliance, always hold both push handles with your hands. Never let go of the appli-
ance while moving it.
§
Move no faster than at walking pace when transporting the appliance. Heavily laden Powerstapler are
difficult to brake and steer. If necessary, ask for assistance when transporting the appliance.
§
Never try to catch the Powerstapler with your hands if it tips over due to carelessness or external cir-
cumstances. Risk of injury.
§
Do not park the appliance on sloping floors.
§
Secure the appliance against rolling away by applying both total locks when stopping it.
§
In the case of off-site transport in a vehicle such as a lorry, secure the appliances properly. The total
locks are not suitable for securing the appliances when they are transported in a vehicle.
§
Heated appliances may only be operated by instructed specialists and kitchen staff and under contin-
uous supervision.
§
Powerstapler are intended for heating suitable heat-retaining base parts. They must not be used to
cook food and keep it warm or to heat rooms.
§
The temperatures can exceed the permitted maximum temperatures of 149°F (65°C) for touchable
appliance surfaces. Always wear protective gloves when dispensing hot heat-retaining base parts.
Risk of burning.
§
Never reach into it and touch the heating element with the fingers when the appliance is in operation.
Risk of burning.
§
Plastic crockery items, top and bottom parts of plastic insulated sets and plastic-coated items for
keeping food warm may not be stored nor warmed up in Powerstapler. The plastics can melt and
catch fire due to the high temperature in the heating element.
§
Before transporting, switch off the appliance using the on/off switch, pull out the mains plug and insert
it into the holder provided.
§
If you apply too much force on the connecting lead, this can cause damage to the lines inside the ap-
pliance. Risk of fire.
§
Never pull the mains plug out of the socket by the lead.
are equipped with a Schuko angle plug. Unlike a straight Schuko plug, this plug only projects slightly
from the socket and so cannot be damaged by impact from the side. If the appliance is moved without
pulling out the mains plug beforehand, the socket can be severely damaged or even pulled out from
the wall as a result of leverage arising from overstretching of the connecting lead. The mains plug and
the lead may also get damaged.
§
Never move the appliance by pulling on the connecting lead.
§
If the mains plug has come into contact with water, it must be dried before it is inserted into the sock-
et. Danger to life.
§
Damaged mains plugs or connecting leads are to be replaced by authorised specialist staff before the
appliance is reused.
§
Do not use any extension cables in wet and damp areas.
§
Only insert mains plugs into suitable sockets. If the mains plug does not fit, the connecting lead of the
appliance is to be retrofitted with a suitable plug by authorised specialist staff.
§
The use of socket adapters is not permitted. Risk of fire.
Powerstapler
PSUH
Safety Instructions for Appliance Safety
HUPFER® appliances in a standard design
Safety Instructions
91346811_A1