Section 4
Page 16
4
Transport, Installation, Initial Operation and Taking out of Service
4.1
Transport
CAUTION
4.2
Commissioning
Ensure that the appliance is clean and dry before putting it into operation. Before the first use of the appli-
ance, remove the protective plastic film from the metal sheeting.
The following appliance functions must be checked before putting it into operation:
§
In the mobile appliances: the functioning of the total locks.
§
In the heated appliances: the functioning of the controls and heating.
INFO
4.3
Storage and Recycling
Appliances must be kept in a dry, frost-free environment when placed in temporary storage. The Powersta-
pler must be kept covered with a suitable covering material to be protected against dust ingress.
The appliance kept in the storage location must be checked for damage and corrosion every 6 months.
NOTE
Before the appliance is taken back into operation, it must be clean and dry.
If the Powerstapler is recycled, all operating and auxiliary materials must be disposed in an environmentally
compatible manner. Recyclable materials must be properly separated and disposed of in an environmentally
compatible manner in accordance with local Waste Disposal Regulations. The local agencies responsible for
disposal must be contacted regarding removal. Separate the reusable materials from the appliance (casters,
plastic items, etc.) before disposing or send the appliance to a recycling centre. Dispose of the electronics at
corresponding collection centres.
We offer our customers to dispose of their waste appliances. Please contact us or one of our distribution
partners.
Packaging and packing material can be sent to the recycling centre by indicating the waste disposal contract
number. If you do not have the valid waste disposal contract number, you can request it from
Service.
Powerstapler
PSUH
Transport, Installation, Initial Operation and Taking out of Service
Damage to appliances caused by improper transport
Appliances should be safely secured when transported off site inside a vehicle
such as a truck. The total locks are not suitable for securing the appliances
when they are transported in a vehicle.
If the appliances are not secured properly, there is a risk of property damage
and personal damage caused by squashing.
Secure each individual separate appliance using suitable transport securing
devices.
Disposal of packing material
The packing consists of recyclable materials and can be disposed of accord-
ingly. The different materials should be separated and disposed of in an envi-
ronmentally friendly manner. The local agencies responsible for disposal must
be contacted regarding removal
Condensation
Ensure that there is sufficient ventilation and no major variations in tempera-
ture in the storage location to prevent condensation from forming.
Transport
®
HUPFER
-
91346811_A1