Operation; Arrangement And Function Of The Controls - Hupfer Powerstapler PSUH Manual De Instrucciones

Operation

Arrangement and Function of the Controls

5 Operation
CAUTION
5.1 Arrangement and Function of the Controls
CAUTION
The controls of the Powerstapler are fitted on the front of the housing on the operating side.
An indicator light integrated into the on/off switch on the front side shows, whether the appliance is ready to
for use.
Figure 3
91346811_A1
Exposed springs
If the stacking platform is pressed down by hand, the springs are exposed.
Reaching into the gaps of the exposed springs may cause hand injuries.
Never press the stacking platform down by hand.
Be careful when attaching and detaching the springs. Pay particular attention
to the ends of the tension springs when adjusting springs on sharp edges.
Damage to property
The temperature settings set ex factory can be changed using the thermostat
behind the panel on the right-hand side of the appliance.
Improper settings may cause damage to the appliance.
Making changes to the basic settings set ex factory requires sufficient
knowledge of the design and functions, and changes may only be made by
authorised personnel.
Controls
Section 5
Page 17
Powerstapler
PSUH