Operation - Hupfer Powerstapler PSUH Manual De Instrucciones

Operation

Operation
5.3 Operation
Before the appliance is put into operation it must be clean and dry.
Before work starts, it is always necessary to check whether the Powerstapler is adjusted correctly for the
items to be used.
The correct dispensing height must be ensured to avoid that the staff suffers injury or becomes trapped and
no breakage of crockery occurs.
Use of the cover
CAUTION
NOTE
Switching on the appliance
DANGER
§
Close the covers to avoid heat loss.
§
Switch off the appliance with the on/off switch if necessary.
§
Insert the mains plug into a suitable socket.
§
Switch on the appliance using the on/off switch. The indicator integrated into the switch will light up to
show when the appliance is ready for use.
Loading the appliance
CAUTION
91346811_A1
Risk of injury
If a stack is too high, do not use the covers to push the stack down forcibly.
There is a risk of injury if the locking is released.
Use of the cover
The cover ensures effective protection against ingress of dust and condensa-
tion even during relatively long periods of temporary storage. Closing the cover
of the heated appliances lowers the heat loss upwards and reduces the heat-
ing time of the inserted items or delays the cooling of pre-heated items.
Hazardous electrical voltage
Electrical current can pose a considerable threat to life and physical well-
being and may lead to injuries.
Only use the plug connection provided for this purpose. The appliance may
not be operated if the connecting lead is damaged or any other damage is
visible.
All work on the electrical installations may only be carried out by a qualified
electrician or by authorised specialists under the supervision and monitoring
of a qualified electrician according to the applicable electro-technical regula-
tions.
Risk of fire
Plastic crockery items, top and bottom parts of plastic insulated sets and plas-
tic-coated items for keeping food warm may not be stored nor warmed up in
Powerstapler. The plastics can melt and catch fire due to the high tempera-
ture in the heating element.
Only use appropriate heat-retaining base parts released by
Section 5
Page 21
®
HUPFER .
Powerstapler
PSUH