Monosem NG Plus 4 2015 Manual De Montaje, Puesta A Punto, Conservación página 6

Tabla de contenido

Publicidad

The machine should only be used, maintained and repaired by trained employees who are aware of the eventual risks. It is essential to respect
the safety regulations mentioned on the machine and accessory stickers and those given in this manual.
with safety working regulations.
GENERAL
1 - In addition to the instructions contained in this manual, legislation relating to safety instructions and accident prevention should be complied with.
2 - Warnings affixed to the machine give indications regarding safety measures to be observed and help to avoid accidents.
4 - Before starting work, it is essential that the user familiarizes himself with the control and operating elements of the machine and their respective
functions. When the machine is running, it may be too late.
5 - The user should avoid wearing loose clothing which may be caught up in the moving parts.
6 - We recommend using a tractor with a safety cab or roll bar conforming to standards in force.
7 - Before starting up the machine and beginning work, check the immediate surroundings, particularly for children. Make sure that visibility is
8 - It is strictly forbidden to transport any persons or animals on board the machine whether it is in operation or not.
9 - The machine should only be coupled up to the tractor at the specially provided towing points and in accordance with applicable safety standards.
10 - Extreme care must be taken when coupling or uncoupling the machine from the tractor.
11 - Before hitching up the machine, ensure that the front axle of the tractor is sufficiently weighted. Ballast weights should be fitted to the special
supports in accordance with the instructions of the tractor manufacturer.
12 - Do not exceed the maximum axle weight or the gross vehicle weight rating.
13 - Do not exceed the maximum authorized dimensions for using public roads.
cause an accident or damage.
18 - The speed and the method of operation must always be adapted to the land, roads and paths. Avoid sudden changes of direction under all circumstances.
19 - Precision of the steering, tractor adhesion, road holding and effectiveness of the braking mechanism are influenced by factors such as the
weight and nature of the machine being towed, the front axle stage and the state of the land or path. It is essential, therefore, that the appro-
priate care is taken for each situation.
20 - Take extra care when cornering, taking account of the overhang, length, height and weight of the machine or trailer being towed.
21 - Before using the machine, ensure that all protective devices are fitted and in good condition. Damaged protectors should be replaced immediately.
if necessary.
23 - Do not stand in the operation area of the machine
25 - Before climbing down from the tractor, or before any operation on the machine, turn off the engine, remove the key from the ignition and wait
until all moving parts have come to a standstill.
26 - Do not stand between the tractor and the machine until the handbrake has been applied and/or the wheels have been wedged.
27 - Before any operation on the machine, ensure that it cannot be started up accidentally.
28 - Do not use the lifting ring to lift the machine when it is loaded.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido