Transport, Initial Operation And Taking Out Of Service; Transport; Commissioning - Hupfer BKW1/14 L-GN Manual De Instrucciones

Carro para banquetes con calentador | neutro
Ocultar thumbs Ver también para BKW1/14 L-GN:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 157

Transport, Initial Operation and Taking out of Service

Transport

4
Transport, Initial Operation and Taking out of Service
4.1
Transport
CAUTION
The banquet trolley is delivered as an assembled unit, i.e. it is completely assembled including the thermal
module.
When loading, use only hoists and load lifting devices approved for appliances 1.5 times heavier than the
banquet trolley to be lifted. Only transport vehicles approved for the weight of the appliance may be used.
The scope of delivery is specified in the shipping documents in accordance with the valid purchase agree-
ment and included with the delivery item.
4.2

Commissioning

DANGER
The banquet trolley and especially the safety equipment must be checked for external visible damages and
defects before being put into operation. In case of damage, immediately inform the competent bodies and do
not put the banquet trolley into operation.
Remove the original packaging and check whether the appliance is complete and undamaged. Do not put a
defective appliance into operation under any circumstances and inform the supplier immediately in such a
case.
Always place the banquet trolley on firm and level floors when unpacking and operating it. Apply the total
brakes on both swivel casters to secure the appliance against rolling away.
INFO
91101983_A4
Damage to appliances caused by improper transport
Appliances should be safely secured when transported off site inside a vehicle
such as a truck. The total brakes are not suitable for securing the appliances
when they are transported in a vehicle.
If the appliances are not secured properly, there is a risk of property damage
and personal damage caused by squashing.
Secure each individual separate appliance using suitable transport securing
devices. If possible, use the transport securing device available at
to be able to fasten the banquet trolley in the lorry without causing any dam-
age.
Hazardous electrical voltage
Electrical current can pose a considerable threat to life and physical well-
being and may lead to injuries.
Before putting the appliance into operation, check whether the power supply
indicated on the rating plate (230V / 50 Hz) corresponds to the local power
supply. If this is not the case, do not put the appliance into operation.
Do not use any extension leads in wet areas.
Disposal of packing material
The packing consists of recyclable materials and can be disposed of accord-
ingly. The different materials should be separated and disposed of in an envi-
ronmentally friendly manner. The local agencies responsible for disposal must
be contacted regarding removal
BKW1/14 L-GN | BKW1/20 L-GN | BKW1/36 B-GN | BKW1/14 L-GN+5PK | BKW1/28 B-GN+10PK | BKW1/23 L-GN
Section 4
Page 19
®
HUPFER
Banquet trolley heated | neutral

Publicidad

Tabla de contenido
loading

Tabla de contenido