Before FIrst Use; Set-Up/Wall Bracket - Nevadent NSLP 3.7 A1 Instrucciones De Uso

WARNING! RISK OF INJURY!
Do not use the "Polish" mode on milk teeth.
►
CAUTION! PROPERTY DAMAGE!
The electric toothbrush may only be recharged with the
►
supplied charger.
Otherwise, the appliance could be irreparably damaged!
Operate the appliance only with the original accessories
►
supplied.
Only the use mains adapter/charger/appliance indoors.
Before first use
1) Clean the appliance as described in the section "Cleaning" to remove any
transport dust. Dry it thoroughly.
2) Place the appliance on a stable and level surface.

Set-up/wall bracket

NOTE
► The charger
► In damp rooms, especially in the vicinity of water (bath), the charger
must be firmly fixed to the wall to protect it from falling into water.
1) Use the screw holes
holes on the wall. Check to ensure that there is a mains power socket in the
immediate vicinity.
2) Before drilling the holes, check to ensure that there are no electrical cables
or water pipes behind the markings.
3) Use a 5 mm drill bit to drill the marked holes and push the wall plugs
4) Affix the wall bracket
5) Ensure that the power cable is not trapped and that it lies properly in the
cut-outs.
│ GB │ IE
■ 22
may only be operated free-standing if used in dry rooms.
of the charger
using the screws
to mark the spacing for the drill
provided.
NSLP 3.7 A1
in.