Removal Of Spreader Bar/Cradle Systems - Sunrise Medical Oxford Hoyer Stature Manual De Instrucciones Y Garantía Para El Usuario

14
The four point cradle sling attaches to the cradle studs via a safety clip system (shown
below), each sling is supplied with instructions. Please study the instruction guide
before use
Leg Strap
Attachment
Points
Shoulder Strap
Attachment
Point
Shoulder Strap
Attachment
Point
4 point positioning cradle.
Example of 4 point cradle sling with safety clip system.
Securi3 sling attachment system. Example of installation.
294000.10017 Rev. B
E n g l i s h
Shoulder Straps
Leg Straps
E n g l i s h

6. REMOVAL OF SPREADER BAR/CRADLE SYSTEMS

FOLLOW THESE INSTRUCTIONS EXACTLY
Your Stature lift has the option of using both a 6 point spreader bar and 4 point posi-
tioning cradle. The removal of either of these systems is completed easily by the use
of a quick-release pin. This is done quickly and easily, but you must read the following
safety instructions to ensure the spreader bar/cradle is safely locked into position
before use.
CONNECTION
To connect, raise the spreader bar/cradle up toward the boom slot.
Insert the pin sleeve through the plastic end cap and to support the spreader bar/cradle.
Once aligned in the boom slot reinsert the quick release pin fully into the sleeve until
it locks into position. YOU MUST CHECK THAT THE PIN IS SECURELY FITTED.
To do this, press your finger into the barbed end. If the pin remains stationary the lift
is safe to use.
15
294000.10017 Rev. B