After preparation
After preparation
EN
Emptying/cleaning the screen insert
Emptying the drip tray
60
Carry out the following operations after every use of the appliance
in order to retain the proper function of the appliance and prevent
mould from forming:
Remove the screen carrier (7) with screen insert (6) from the
appliance as described in chapter Removing the screen
carrier.
Fold up the retaining bracket (14) on the handle of the screen
carrier.
Hold the screen insert firmly with the folded up retaining bracket
and tap the used coffee out of the screen insert (6) over the
waste bin.
NOTE
Use a spoon if the used coffee does not come loose.
►
Remove the screen insert (6) from the screen carrier (7) and
rinse out the screen insert and screen carrier under running
water.
Remove the cup rest (10).
Raise the drip tray (9) slightly at the front and carefully pull it out
of the appliance to the front.
Empty the drip tray and rinse it out with warm water.
Clean the cup rest (10) using a damp cloth.
Install the drip tray and cup rest in the appliance again after
drying.
BEEM - Elements of Lifestyle