ARIETE 1366B Manual De Instrucciones página 24

Problems Causes
The coffee is The perforated disc located in
not supplied
holder has clogged holes.
slowly.
coffee has the output hole
clogged.
The coffee blend is ground
The coffee blend is pressed
down too much.
The tanks is not inserted well.
The hole of the silicone disc
is clogged.
There is little water and the
pump does not suck it up.
The coffee is The blend has been ground
too watery too coarsely.
and cold.
24
Solutions
making the water run. Turn on the machine
If the water still does not come out from all the
holes evenly, carry out the descaling cleaning
found at Ariete service centres, following the
instructions provided in the package.
because any remaining pressure could cause
splashes or squirts. Clean the clogged hole of
the instructions provided in the package.
Try using coarser coffee blends.
sure.
will go.
bending it slightly on the sides in order to free
the centre hole of any residue of coffee groun
check that the water level in the tank is normal.
mark.
sponge and insert a new pod
obtain a more concentrated and hotter coffee.
Anyhow, this problem is easily solved thanks
guarantees hot coffee accompanied by a reach
cream, even with coarsely ground beans.