König KN-CDPLAY130 Manual De Uso página 2

Introduction:
This Digital Controller is small, but it is full with functions and possibilities such as USB Master,
USB Midi, CD-ROM/MP3 fully function support. The big jog wheel in the middle creates sound
effects such as scratch and brakes easily. The KN-CDPLAY130 has a graphic display for fast and
clear overview. This controller is made by DJ's for DJ's.
Description back view:
1. USB Port (for External USB storage device)
i. The unit supports FAT formatted USB storage device and first partition only.
ii. Maximum length of a single track must not exceed 99 minutes.
2. USB Port (for PC Link)
USB connect socket for PC software Link.
3. LINE OUT (Output Jacks)
The audio from each CD player is output from these jacks. Connect to the line input of the mixer.
4. DIGITAL OUT
The digital from each CD player is output from these jacks. Connect to the line input of the D/A
Amplifier.
5. Fader Start
This connector is used for fader start; connect it to a mixer, and remote control the „START/
PAUSE" by moving the fader of mixer.
6. Relay
This connector is used for connecting to another CD player to allow Relay function to work.
7. DC INPUT
Connect the AC adaptor plug in the DC input connector of the CD player before plugging the AC
adapter on the 0V power net.
8. Power Switch