Teka HPL-870 Guía Rápida De Uso página 40

1. Touch the sensor
You will hear a loud beep and on the
cooking function display you will see:
2. Turn the function selector until you see the
cooking symbol on the display. The oven will
then recommend a specific temperature for
this function.
3. If you wish to cook at a different temperature,
adjust the temperature selector. Failure to do
so will mean that the oven will cook at the
recommended temperature.
4. You will then hear 2 beeps confirming your
setting.
5. The setting can also be timed or
programmed using the electronic timer by
following the instructions outlined above.
6. When your oven starts cooking, it will
preheat quickly, giving out a beep when the
selected temperature is reached. During
this process the fan inside the oven may be
activated.
40
Selecting a conventional cooking setting
to switch the oven on.
7. As the temperature rises, you will see the
heat indicator gradually increase until the
correct setting is reached.
8. During cooking, symbol
indicate that heat is being transmitted to
the food. This symbol turns itself off when
the selected temperature has been
reached.
9. You can change the temperature at any
time by turning the selector round to the
required setting. The ºC icon will start to
flash on the display.
10.When the cooking cycle finishes, touch the
sensor . The over will turn itself off,
just showing the current time.
11.As the oven cools, the heat indicator will
gradually go out, indicating the residual
heat still remaining inside the oven.
CAUTION
You will notice that the cooling function is still
working. This is normal and is used to cool the
oven down quickly.
will light up to