GreenWorks Pro SN60L00 El Manual Del Propietario página 11

ASSEMBLY INSTRUCTIONS
ASSEMBLING THE HANDLE (See Figure 2)
• Align the holes (4) on the middle handle (2) and the lower handle (3). Insert the bolts (5), and
use the handle knobs (6) to tighten them.
• Align the hole on the middle handle (2) and the upper handle (1). Insert the cam locks (7)
and tighten them with the handle knobs (8) provided. Once tightened, close the cam locks to
secure them in place.
NOTE: If the upper handle is loose or separated from the middle handle, tighten the cam lock handle knobs
by turning them clockwise. Do not overtighten the handle knobs.
(1) Upper handle
(2) Middle handle
(3) Lower handle
Fig. 2
(8) Handle knob
(6) Handle knob
11
(7) Cam lock
(5) Bolt
(4) Holes