Reversing The Door Swing - Cafe CCP06BP Serie Manual Del Proprietário

Installation Instructions
INSTALLING THE BEVERAGE CENTER
REVERSING THE DOOR SWING - MODELS WITH CAFE HANDLE - CCP06BP****
1. Open the door and use a flat head screw driver to
remove the top and bottom covers from the cabinet
opposite the hinge side.
Remove the top and bottom hinge covers to gain
access to the screws. Push in on the tab while
disengaging the cover with a flat head screw driver
Push to Release
2. Loosen the screws that hold the top and bottom
hinges to cabinet.
REVERSING THE DOOR SWING - MODELS WITH POCKET HANDLE - CCR06BM****
1. Open the door and use a flat head screw driver to
remove the top and bottom covers from the cabinet
opposite the hinge side.
12
Screws
3. Remove the door and leave the hinges open.
4. Remove the hinge screws and install them on the
other side. Install screws only part of the way so that
hinges can slide behind the screw heads.
5. Remove trim screws and install in opposite corners.
Trim Screws
6. Flip the door and slide the hinges behind the screw
heads.
7. Tighten hinges screws.
8. Install covers to cabinet on the other side.
Remove the top and bottom hinge covers to gain
access to the screws. Push in on the tab while
disengaging the cover with a flat head screw driver
Push to Release
Screws
49-1000491 Rev. 3