About These Instructions; Safety Advice - GOK SmartBox MINI Instrucciones Par El Montaje Y El Funcionamiento

ABOUT THESE INSTRUCTIONS

• These instructions explain how to install and operate the SmartBox
digital display unit.
• Separate installation and operating instructions are available for the
mechanical level gauge type FSA-E.
• These instructions are part of the product.
• Keep them in a safe place while you are using the product.
• These instructions must be observed and handed over to the operator to
ensure that the component operates as intended and to comply with the
warranty terms.
• In addition to these instructions, please observe national regulations, laws and
installation guidelines.
Observe the installation and operating instructions for "FSA-E level gauge" part no. 15 276 50.

SAFETY ADVICE

Your safety and the safety of others are very important to us. We have provided many
important safety messages in this assembly and operating manual.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word
"DANGER", "WARNING", or "CAUTION". These words mean:
describes a personal hazard with a high degree of risk.
 May result in death or serious injury.
describes a personal hazard with a medium degree of risk.
 May result in death or serious injury.
describes a personal hazard with a low degree of risk.
 May result in minor or moderate injury.
describes material damage.
 Has an effect on ongoing operation.
May not be used in potentially explosive areas.
Can cause an explosion or serious injuries.
Must be installed by a specialised company in accordance with local industrial
health and safety regulations.
Installation outside the defined EX protection zone.
14 / 72
®
SmartBox MINI
®
MINI
Artikel-Nr. 28 900 50