Rear Panel; Multimedia Remote Control - Sanyo AVM-3259G Manual Del Propietário

REAR PANEL

Cable / Antenna Input
Terminal (75 ohms)
UHF/VHF/CATV
75Ω
AUDIO
VIDEO
INPUT
1
AUDIO
VIDEO
INPUT
2
Audio /Video Input Jacks (A/V1)
Connect external video equipment
here (see pages 12).

MULTIMEDIA REMOTE CONTROL

Operates your TV, VCR, DVD, and Cable converter box. To familiarize yourself with this
remote control, see page 6. To program the remote control, see pages 7~8.
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting
the cover upward. Insert batteries. Make sure you match
+
/ signs on the batteries with marks inside the
remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will not be
used for a month or more. Weak batteries may leak and
cause damage.
S-VIDEO IN -1
AUDIO
OUTPUT
(MONO)
AUDIO VIDEO
R L
L
R
AUDIO VIDEO
R L
(MONO)
Audio/Video Input Jacks (A/V2)
Connect other external video equip-
ment here (see pages 12).
S-Video (Super-Video) In-1 Terminal
To enhance video detail use the
S-Video In-1 jack instead of the A/V1
Video jack, if available on your exter-
nal video equipment. (S-Video 1
connection will override a Video1
connection.)
Audio Output Jacks (Fixed)
Connect external audio
equipment here (see page 11).
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
See pages 11 and 12
before connecting
external audio/video
equipment.
Cables are not
supplied for connect-
ing your external
equipment.
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control and the
equipment may cause
misoperation of the
remote control
function.
5