Disassembly - Tribest GreenStar PRO GS-P502 Manual De Intrucciones

B. Disassembly
IMPORTANT: Make sure your juicer is switched off before disassembly
1. Unplug the Power Cord
from your electrical outlet,
and then remove the power
cord from the rear of the
machine.
2. Remove the Safety Hood
by lifting up the Safety Tray.
3. Turn the Juicing Knob
or Breadstick Knob coun-
terclockwise to loosen it.
Remove it by sliding it out.
4. Unlock both Latches by
pulling on the metal tabs.
Open the latches away from
the Outlet Casing.
5. Remove the Outlet Casing
by sliding it away from the
Main Body. Note that the
Screen and/or the Twin
Gears may come out with
the Outlet Casing.
6. Remove the Screen.
7. Carefully slide the Twin
Gears out of the Twin Gear
Housing.
8. Remove the Twin Gear
Housing by holding the feed-
ing chute and sliding it away
from the Main Body.
9. Remove the Seal
Protective Cap.
Note: The Twin Gears on your juicer never need
sharpening. They are not blades. They work by
'biting' off small bits of produce at a time, much
like your teeth. They do not grate or slice your
produce, allowing them to work at remarkably
low speeds and preserving fragile nutrients and
enzymes.
EN
11