Hot Surface Indicator; Initial Cleaning - Samsung NZ30K6330R Serie Manual Del Usuario

Before you start
Location of the surface elements and controls
01
04
06
01 Left Rear 02 Center
(7", 1500 W) (6"/9", 3300 W)
04 Left Front 05 Right Front
(7", 1500 W) (5"/8", 2000 W)

07 Hot surface indicator

08 Smart Connect button
16 English
NZ30K6330R_DG68-00821A-05_EN+MES+CFR.indb 16
03
02
05
08
07
03 Right Rear
(6", 1200 W)
06 Control Knob
Knob lighting
Press and turn the knob to a desired setting.
The indicator turns on and confirms the
selected setting.
Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• The hot surface indicator turns off only when the cooking zone has cooled
down to approximately 150 °F.
Cooking areas
• The cooking areas on your cooktop are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
• Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
• For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware".

Initial cleaning

Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass
cleaner.
WARNING
Do not use caustic or abrasive cleaners. You can damage the surface.
2018-08-29 2:21:38