Working With The Spectrosense; Preparing The Spectrosense - Metrohm Spectrosense Instrucciones Para El Uso

2 Working with the Spectrosense

2 Working with the Spectrosense

2.1 Preparing the Spectrosense

1
2
3
4
26
Attach sleeve
Insert the electrode shaft (7) into the sleeve (6) until its O-ring
snaps into the lower groove. This might be easier if you first moisten
the O-ring of the sleeve. For sample changer applications move the
sleeve to the upper groove. This way the electrode shaft protrudes
farther into the titration vessel.
Attach mirror
Screw the enclosed mirror (8) onto the end of the electrode
shaft (7).
Connect Spectrosense to titration device
Connect the measuring output 'out' (2) with the enclosed elec-
trode cable 6.2116.020 with the measuring input 'Ind.' of your
Titrino or Titrando.
Power supply
• Power supply via Titrando
Connect the power supply (1) of the Spectrosense with an
MSB connection of your Titrando. Use the enclosed cable
6.2151.070.
1 2
Fig. 2 Titrando – Spectrosense
Spectrosense
Spectrosense, Instructions for Use