Layout; Items Supplied; Intended Use - Parkside PDMH 4500 A1 Instrucciones De Utilización Y De Seguridad

Anleitung_LB5_4139034:_
noise and vibrations.
If dust or gas arises, they must be checked
■
as a priority at the moment they arise.
Select, service and use the consumables /
■
plug-in tools as recommended in the
operating instructions. This will help you to
prevent unnecessary dust, gas, noise and
vibrations.
Stop using the equipment if you experience
■
numbness, tingling, pain or whitening of the
skin on your fingers or hands and consult a
doctor.
Do not hold the plug-in tool with your free
■
hand as this will lead to a higher vibration
load.
Do not use any quick-lock couplings at the
■
air inlet. Use hose connections with a
hardened steel thread (or a material with
comparable resistance to vibrations).
If universal rotary couplings (claw couplings)
■
are used, lock pins must be installed and a
retention system for compressed air hoses
used in order to protect against possible
faulty connections ("hose to tool" or "hose to
hose").
3. Layout (Fig. 1/2)
1. Cylinder
2. Trigger lever
3. Air regulation screw
4. Nipple
5. Tensioning spring
6. Flat chisel
7. Pointed chisel
8. Rivet chisel
9. Parting chisel (Sheet metal chisel)
10. Universal chisel
11. Special compressed air oil
13.04.2011 13:50 Uhr Seite 41

4. Items supplied

Open the packaging and take out the
■
equipment with care.
Remove the packaging material and any
■
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
■
Inspect the equipment and accessories for
■
transport damage.
If possible, please keep the packaging until
■
the end of the guarantee period.
IMPORTANT
The equipment and packaging material are
not toys. Do not let children play with
plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!
Air chisel hammer
■
Nipple
■
Tensioning spring
■
Chisel set (5 chisels)
■
Special compressed air oil
■
Original operating instructions
■

5. Intended use

The chisel hammer is a pneumatically operated
tool for versatile use. It is suitable for example
for making slits, for removing tiles or outdoor
plaster, for making holes through masonry, for
cutting sheet metal and for removing bolts or
rivets.
The exhaust air escapes from the housing to the
front.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user/operator and
not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
GB/
MT
41