Technical Specifications - miniland baby Everywhere Manual De Usuario

Problem
Unsatisfactory audio
reception
The image is seen
with too much delay
It is not possible to
see the video events
6. MAINTENANCE
Clean the appliance with a soft dry cloth. Do not use cleaning products or solvents.

7. TECHNICAL SPECIFICATIONS

Frequency
Operating Range
Image sensor
Lens
Audio
Image Format
Image Compression
Images per second
Resolution
Zoom
microSD card
Recording time
Application
Power
Power consumption
Operating temperature
Storage temperature
Possible Cause
There are mobile phones
or wireless phones too near
the surveillance device
The camera and its device
are too close to each other
The network to which the
camera or your device is
connected is saturated
Your camera has lost the
connection
2.4 GHz
100 m between the camera and the router*
¼ CMOS
4.2MM
Two-way
PAL / NTSC
H264
30fps
1280x780, 640x480 (VGA), 320x240 (QVGA)
Digital
Up to 32 Gb
20 s/ motion detection
eMyBaby available for iOS and Android
DC 5V 2.0A
6W/4W (infrared on/off)
-10 to +55 ºC
-20 to +60ºc
Keep the phones away from the
device
Keep the devices away from
each other until reception
improves
Download the video quality in
the advanced configuration of
your camera
Make sure that your Wi-Fi
network is working properly
Press "Reconnect" (iOS) or
"Reconnect" (Android) in your
camera options, see point
5.1.2.1, section d).
23
Solution
en