Maintenance - Smartpond 52399 Manual Del Usuario

MAINTENANCE

PUMPSHIELD®:
• Clean the pumpshield® and (if necessary the pump) regularly
depending upon the environment in which it is operated. A
drop in water flow is an indication that your pumpshield®
and/or pump require cleaning. The pumpshield® not only
protects your pump but significantly reduces the need for pump
maintenance.
• Before cleaning, always disconnect the pump from the power
source.
• Remove any large debris from pumpshield®. Use a garden
hose to rinse off any other dirt from the pumpshield®.
PUMP:
Regular cleaning of the pump may be necessary depending
upon the environment in which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is
detected. Clean your pump in 4 easy steps!
Step 1 Before cleaning,
:
always disconnect the
pump from the power
source and remove the
inlet screen.
Step 2 Remove the
:
impeller housing to expose
the impeller assembly.
Remove the impeller
assembly by gently pulling
on the impeller blades.
NOTE: The impeller is held
in place by a magnet.
Step 3 Use a soft cloth
:
or brush and warm water
to clean the impeller, the
inside of the impeller
housing and the rotor
housing.
Step 4 Reassemble all pump parts, place the pump inside the
:
pumpshield®, and place in water before reconnecting to the
power source.
4
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.