Descargar Imprimir esta página

Features And Controls; Know Your Pressure Washer - Troy-Bilt 020242 Manual Del Propietário

Ocultar thumbs Ver también para 020242:

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
ProjectPro™
Nozzles
Accessory Tray
Spray Gun
High Pressure Hose
Data Tag
Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, etc.
Air Filter — Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F.Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Lever — Prepares a cold engine for starting.
Data Tag (not shown) – Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
Pump equipped with
Automatic Cool Down System
Chemical Injection
Siphon/Filter

Features and Controls

Water Inlet
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
Nozzle Extension with Quick Connect — Allows you
to switch between four different nozzles.
Oil Fill/Dipstick — Check and fill with oil here.
ProjectPro™ Nozzles — Chemical injection, 0°, 15°, and
40°: for various high pressure cleaning applications.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connection for garden hose.
5
Fuel Tank
(on front of engine)
Nozzle Extension
with Quick Connect
Oil Fill/Dipstick
High Pressure Outlet
Section
2
Choke Lever
Throttle Lever
Recoil Starter
Air Filter

Publicidad

loading