Operating; Switching On; Change Wind Display - Vetus WSD834 Manual De Manejo Y Instrucciones De Instalación

3 Operating

3 .1 Switching on

The instrument must be switched on with a
separate switch (there is no ON/OFF switch on
the instrument itself).
All segments will
be shown for 2 sec-
onds. *).
*) If the LIGHT (RESET) button is pressed
and held in until the software version is no
longer displayed all settings will be reset to
the factory settings (Default).
The software version
and RESET will be
displayed for 4 sec-
onds.
The apparent (APP)
wind speed and
wind direction will be
displayed (for exam-
ple 5.8 m/s en 35˚
port).
This is the normal
display.
The instrument must be calibrated when it is
used for the first time . See Chapter 4 .
If the instrument has already been cali­
brated it is now ready for use . See Chapter
3 and further for how to operate .
20
10.0312

3 .2 Change wind display (

Press the
select a different wind display.
When the
is displayed for 5 sec. to show that the wind
display can be changed.
Press the
twice when in normal
display.
The scale will change
from 2x 180˚ to 2x
70˚. This is termed
'Close Hauled'.
WSD834M101
and APP will flash
for 5 sec. and then
remain displayed.
Press the
twice.
The scale will change
from 2x 70˚ to 2x
180˚.
The true (TRUE)
wind speed and wind
direction will be dis-
played.
This will only be
displayed correctly
WSD834M102
if the ship's speed is known and the instru­
ment receives a signal giving the speed .
TRUE will flash for 5 sec. and then remain
displayed.
Press the
twice.
The apparent (APP)
WSD834M103
wind speed and wind
direction will be dis-
played.
APP will flash for 5
sec. and then remain
displayed.
This is back to the normal display.
Wind speed/ wind direction indicator WSD834
button twice or more times to
button is pressed once a flashing
button
CH
WSD834M112
button
WSD834M113
button
WSD834M114
)