Reinstall Bottom Panel; Light Bulbs - Broan Elite E661 Instrucciones De Instalación

7. REINSTALL BOTTOM PANEL

Reinstall the bottom panel, using 5 screws saved from step 3,
as shown beside. Reinstall filters.
CAUTION
Remove protective plastic film covering filters before
installing them.

8. LIGHT BULBS

This hood must use 120 V, 50 W max., type MR16, GU10 shielded halogen lamps. (Purchase separately).
In order to prevent the risk of personal injury, do not install a lamp identified for use only in
enclosed fixtures.
NOTE: The rings must be removed from bottom banel before installing halogen lamps.
8.1 Install the lamps by placing the bulb leads into their grooves in the socket
and gently push upward and turn clockwise until secured.
8.2 Install trim rings by pushing upward.
In order to prevent the risk of personal injury, the halogen
lamps must be cooled down before removing them.
8.3 To remove lamps, gently push upward and turn counterclockwise to
disengage bulb leads from their grooves.
WARNING
!
WARNING
!
HD0124
HE0047
HO0034
HE0047
- 9 -