Technical Specifications - Philips BG9041 Manual Del Usuario

Technical specifications

Rated voltage
Rated frequency
Rated input
Protection against electric shock
Protections rating
Operating conditions
Storage conditions temperature
Storage conditions humidity
Maximum variation of the light
output over the treatment area
Operating pressure
Duration of the pulsetrain
Emitted wavelengths
Lithium-ion battery
Optical exposure
Maximum optical energy
Optical homogeneity
Repetition time
Pulse duration
Flash interval
Pulse sequence
Troubleshooting
Problem
The device/adapter
becomes warm during use.
BG9041
100V-240V
50Hz-60Hz
65W
Class II
IP 30 (EN 60529)
Temperature: 5 °C to 35 °C
Relative humidity: 15% to 90% (non condensing)
-25° to +70°C
Less than 90% (non condensing)
<20%
700hPa-1060hPa
Single pulse
560 to 1400 nm
2 x 3.6 Volt 1000 mAh
2.4-6.5 J/cm²
4.8 - 23 J
Max. +/- 30% deviation from average optical exposure in
treatment area
0.9 s - 2 s (corded), 1.6 s - 3.5 s (cordless)
<2.5 ms
Between 1-3.5s depending on battery/mains connected use
Single pulse
Possible cause
It is normal for the device and
adapter to become warm (but
not too hot to touch) during
use.
Solution
Use the device in a slightly cooler
environment and/ or let it cool down
before continuing use.
English
27