Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Troubleshooting (con't)
Problem
Flame is yellow or orange.
Flame blow out
Flare-up
Persistent grease fire.
Flashback (fire in burner
tube(s))
Inside of lid is peeling-like
paint peeling
Owner's manual: model NSG4303 outdoor gas grill
Possible Cause
New burner may have residual
manufacturing oils.
Spider webs or insect nest in venturi
Food residue, grease or seasoning salt on
burner.
Poor alignment of valve to burner venturi.
High or gusting winds
Low on LP Gas
Excess flow valve tripped
Grease buildup.
Excess fat in meat.
Excessive cooking temperature.
Grease trapped by food buildup around
burner system
Burner and/or burner tubes are blocked
The lid is stainless steel, not paint.
1/14/04
Prevention/Cure
Burn grill for 15 minutes with the lid closed
Clean venturi.
Clean burner.
Assure burner venturi is properly engaged
with valve
Turn front of grill to face wind or increase
flame height to HIGH setting
Replace or refill LP cylinder
Refer to "Sudden drop in gas flow"
Clean grill.
Trim fat from meat before grilling.
Adjust (lower) temperature accordingly.
Turn knobs to OFF. Turn gas off at LP
cylinder. Leave lid in closed position and
let fire burn out. After grill cools, remove
and clean all parts.
Clean burner and/or burner tubes
Baked on grease buildup has turned to
carbon and is flaking off. Clean thoroughly.
32