General Safety Instructions; Suitable Personnel; User Manual Information - Amann Girrbach ceramill argovent 2 Modo De Empleo

2 General Safety Instruc-
tions
When installing, starting-up and operating the
machine, always observe the following safety
instructions:
WARNING:
Fire hazard!
▷ In case of unexpected processes in the furnace
(for example, strong smoke development or
odour nuisance), switch the furnace off imme-
diately and allow the furnace to cool down to
room temperature.
CAUTION:
A defective machine can lead to malfunctions!
On detection of damage or a functional defect of
the machine:
▷ Label the machine as defective.
▷ Prevent further operation until the machine
has been repaired.
NOTE:
Increased wear of door gasket, insulation, heat-
ing rods and furnace housing!
▷ Avoid opening the furnace when in hot condi-
tion (above 200 °C )!
G E N E R A L S A F E T Y I N S T R U C T I O N S
3

Suitable Personnel

NOTE:
Starting-up and operation of the machine may
only be carried out by trained specialised per-
sonnel.
4

User Manual Information

NOTE:
The contents in this User Manual may possibly
differ from the contents of the User Manual
included with the Argotherm 2 furnace. Only the
information and instructions on the use of
Argovent 2 of this User Manual are binding and
to be observed. Danger of malfunctions in case
of non-observance!
E N
23