Cleaning Before Use; Space Requirements - mabe RMC275PURS0 Instructivo

unpacking your refrigerator-freezer
WARNING: TWO OR MORE PEOPLE ARE NEEDED
TO MOVE THE APPLIANCE. FAILURE TO FOLLOW
WARNING COULD RESULT IN BACK OR OTHER IN-
JURIES.
• Remove tape and any labels from your refrigerator-freezer before
using (except the rating label).
• To remove any remaining tape or glue, rub the area briskly with
your thumb.
• Tape or glue residue can also be easily removed by rubbing a small
amount of liquid dishwashing soap over the adhesive with your
fingers. Wipe with warm water and dry.
• Do not use sharp instruments, rubbing alcohol, flammable fluids,
or abrasive cleaners to remove tape or glue. These products can
damage the surface of your appliance.
• When moving the appliance, do not tilt the refrigerator-freezer
beyond 45° from upright position.

cleaning before use

After you remove all of the packaging materials, (especially the
foam between outside condenser and cabinet should be removed),
clean the inside of the refrigerator-freezer before using it.

space requirements

WARNING: KEEP THE APPLIANCE AWAY FROM
FLAMMABLE MATERIALS SUCH AS GASOLINE.
FAILURE TO DO SO, COULD RESULT IN DEATH, EX-
PLOSION, FIRE OR BURNS.
To assure proper ventilation for the unit, allow 200 mm space on
each side between walls, 200 mm space between back of your re-
frigerator-freezer and the wall, and 300 mm space between counter
top and the roof or ceiling.
If you are installing your refrigerator-freezer next to a fixed wall,
leave sufficient space on the hinge side to allow for the door to
open.
Never install the refrigerator near heat sources and direct sunshine.
17