Installation Instructions; Build The Fence; Build The Earth (Ground) System; Installing The Energizer In 3 Steps - Gallagher B60 Manual De Instrucciones

3E0082 Gallagher B60 Portable Fence Energizer Manual

INSTALLATION INSTRUCTIONS

This Energizer is designed for simple installa on and opera on.

Build the Fence

See the enclosed Power Fence Manual for complete fence building instruc ons.

Build the Earth (Ground) System

For maximum performance from your
Energizer, the earth (ground) system
must be correctly installed. Use the
number of galvanized earth pegs
(G619) stated on the Energizer label.
Earth pegs, at least 2 metres (6½ )
long, should be spaced 3 metres (10 )
apart. See the enclosed Power Fence
Manual for complete earth (ground)
instruc ons.

Installing the Energizer in 3 Steps

Step 1. Mount the Energizer
Installa on Under Cover (No Solar Panel)
a) Mount the Energizer on a wall, under cover, out of reach
of children. Mount in a place where there is no risk of
the Energizer incurring fi re or mechanical damage and
where the ba ery leads can be a ached easily.
b) Drill 2 holes using the template on the
drilling guide (A and B holes). Use a 4mm (
diameter drill for mber walls or a suitable wall plug for
brick or concrete walls.
c) Using the screws clipped to the Energizer, secure a
screw in hole (A) leaving the head of the screw about
3
8mm (
d) Hang the Energizer on the screw. Fit screw through
Energizer into hole (B) for extra stability if necessary.
/ ") out from the wall/post as illustrated (3c).
8
12V
back page as a
5
/ ")
32
3a
3b
3c
3d
7