Laser safety notices
ATTENTION, LASER RADIATION – LASER CLASS 2
Never look directly into the beam!
The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007)
safety regulations for a product of laser class 2 as well as the
U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice
No. 50" from June 24, 2007.
Never look directly into the laser beam or in the direction of reflected laser
beams!
If you look into the beam path over a longer time period, there is a risk of injury
to the retina.
Do not point the laser beam of the device at persons!
Interrupt the laser beam using a non-transparent, non-reflective object if the
laser beam is accidentally directed towards a person.
When mounting and aligning the device, avoid reflections of the laser beam
off reflective surfaces!
CAUTION! The use of operating or adjusting devices other than those speci-
fied here or carrying out of differing procedures may lead to dangerous expo-
sure to radiation.
Observe the applicable statutory and local laser protection regulations.
The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
1
NOTE
Laser information and warning signs firmly attached to the device:
A Laser aperture
B Laser warning sign
C Laser information sign with laser parameters
EN
17