Making Home-Made Fries - ARNO Fry Delight Manual De Instrucciones

should not be filled more than halfway.
Note: Add 3 minutes to the preparation time when you start frying while the Fry Delight is still
cold

MAKING HOME-MADE FRIES

For the best results, we advise to use pre-baked (e.g. frozen) fries. If you want to make home-
made fries, follow the steps below.
1. Peel the potatoes and cut them into sticks.
2. Soak the potato sticks in a bowl for at least 30 minutes, take them out and dry them with
kitchen paper.
3. Pour ½ tablespoon of olive oil in a bowl, put the sticks on top and mix until the sticks are
coated with oil.
4. Remove the sticks from the bowl with your fingers or a kitchen utensil so that excess oil stays
behind in the bowl. Put the sticks in the basket.
Note: Do not tilt the bowl to put all the sticks in the basket in one go, to prevent excess
oil from ending up on the bottom of the pan.
5. Fry the potato sticks according to the instructions in the section 'Settings'.
CLEANING
Clean the appliance after every use.
The pan and the basket have a non-stick coating. Do not use metal kitchen utensils or
abrasive cleaning materials to clean them, as this may damage the nonstick coating.
1. Remove the mains plug from the wall socket and let the appliance cool down. Note: Remove
the pan to let the air fryer cool down more quickly.
2. Wipe the outside of the appliance with a moist cloth.
3. Clean the pan and basket with hot water, some washing-up liquid and a non-abrasive
sponge.
You can use a degreasing liquid to remove any remaining dirt.
Note: The pan and basket are dishwasher-proof.
Tip: If dirt is stuck to the basket or the bottom of the pan, fill the pan with hot water
with some washing-up liquid. Put the basket in the pan and let the pan and the basket
soak for approximately 10 minutes.
4. Clean the inside of the appliance with hot water and a non-abrasive sponge.
5. Clean the heating element with a cleaning brush to remove any food residues.
STORAGE
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
3. Push the cord into the cord storage compartment. Fix the cord by inserting it into the cord
fixing slot.
32