Automatic Restart - Royal Sovereign ARP-4009 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fan Speed control
Press the Speed button to set the fan speed. The fan settings are low, medium, and high.
note: The air will be circulated without cooling or heating and the unit does not have to be vented for this mode.
timer
There are 2 different timer programs. You can set the number of hours before the air conditioner automatically turns OFF or you can set the number of hours that will elapse before the unit turns ON.
When the air conditioner is turned off, you can choose to turn it on in one hour intervals.
1.∙Press∙the∙Timer∙button∙on∙the∙Control∙Panel∙(the∙timer∙indicator∙light∙will∙be∙lit).
2.∙∙ C ontinue∙to∙press∙the∙Timer∙button∙until∙you∙reach∙the∙number∙of∙hours∙you∙want∙to∙elapse∙before∙the∙unit∙turns∙on.∙∙Example:∙If∙you∙want∙the∙air∙conditioner∙to∙turn∙on∙in∙eight∙hours,∙
press the button until you see 8 on the display.
3. The unit will turn on when the set time elapses
When the air conditioner is turned on, you can choose to turn it off in one hour intervals.
1.∙Press∙the∙Timer∙button∙on∙the∙Control∙Panel∙(the∙timer∙indicator∙light∙will∙be∙lit).
2.∙Continue∙to∙press∙the∙Timer∙button∙until∙you∙reach∙the∙number∙of∙hours∙you∙want∙to∙elapse∙before∙the∙unit∙turns∙off.∙∙Example:∙If∙you∙want∙the∙air∙conditioner∙to∙turn∙off∙in∙eight∙hours,∙
press the button until you see 8 on the display.
3. The unit will turn off when the set time elapses
oscillation Mode
The oscillation feature moves the air louvers from left to right to allow the air to reach more areas in the room. Press the OSC button to start this feature.
Sleep Mode
Sleep Mode is used to keep the room comfortable while saving energy. When the Sleep Mode button is pressed, the set temperature will increase by 2 ° F in the first hour and increase another 2° in
the second hour. It will then remain at that temperature for the remainder of the night.
tank Full
Condensed∙water∙may∙accumulate∙in∙the∙unit.∙If∙the∙internal∙tank∙fills,∙it∙will∙begin∙to∙make∙a∙beeping∙sound.∙The∙unit∙will∙not∙operate∙until∙the∙unit∙has∙been∙drained∙(See∙Maintenance∙Page∙for∙
instructions∙on∙how∙to∙drain.)

automatic restart

In∙the∙event∙of∙a∙power∙failure:∙The∙settings∙will∙return∙to∙the∙previously∙set∙operating∙modes∙once∙the∙power∙is∙restored.∙∙
power plug check
1. Press the RESET button.
2. Insert the power plug into the electrical outlet.
3. Press the TEST button. If the circuit breaker is working you'll hear a click.
4. Press the RESET button until you hear another click. The circuit breaker in the plug is now activated.
5. Do not use the air conditioner if the above procedure cannot be successfully performed.
after switching the air conditioner off, wait 3 minutes before switching it back on again.
arp-4009, 4010, 4012, 4012H
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Arp-4010Arp-4012Arp-4012hAir-4012Air-4012h

Tabla de contenido