13.3 Unpacking
13.4 Disposal of the packaging
caso CM1000
To unpack the device, proceed as follows:
Remove the device out of the carton and remove the packaging
material.
Open the door of the device and remove the internal protective
film from the door.
Remove the red coloured safety adhesive strip on the floor of
the cooking chamber.
Do not remove the film on the oven ventilation opening!
Remove the blue protective film on the device itself.
► Only remove the blue protective film shortly before setting up
the device in the location where it will be used, to prevent
scratches and dirt accumulations.
The packaging protects the device against damages during
transit. The packaging materials are selected in accordance
with environmentally compatible and recycling-related points of
view and can therefore be recycled.
Returning the packaging back to the material loop saves raw
materials and reduces the quantities of accumulated waste.
Take any packaging materials that are no longer required to
"Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the
duration of the guarantee period of the device, in order that
the device can be re-packaged properly in the event of a
guarantee claim.
Please note
Please note
Commissioning
48