Assembly - Char-Broil 600 Serie Manual Del Usuario

ASSEMBLY

1 1
FIRST, GET A HELPER! This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable
location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective surface
during assembly.
To begin assembly, build two leg assemblies by sliding the long leg sections into the short leg sections.
2 2
Attach leg braces to the outside of one leg assembly using 4 each 1/4-20x1 3/4" screws and 4 each 1/4-20 flange nuts.
Do not fully tighten screws until Step 6 is complete.
Page 8