Char-Griller 1624 Manual Del Usuario página 9

HARDWARE AND TOOLS
Assembly: Get another person to help. Tools Needed: Hammer, Pliers, and a 7/16" Nut Driver.
NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon may prohibit parts
from fitting together. All Hex Nuts should be on the inside of the grill unless stated otherwise. Unpack
all contents in a well cleared and padded area.
NEEDED
¼-20x 2" BOLT............................4PCS
¼-20x 1 3/4" BOLT....................12PCS
¼-20x 3/4" BOLT.........................3 PCS
¼-20x ½" BOLT......................... 15 PCS
2/5" FLAT WASHER....................2 PCS
¼" FLAT WASHER........................2 PCS
¼-20 HEX NUT............................36 PCS
¼" LOCK WASHER......................1 PC
HINGE PINS..................................2 PCS
LARGE HAIR COTTER PIN.............2 PCS
SMALL HAIR COTTER PIN............2 PCS
HUB CAP.....................................2 PCS
UTENSIL HOOK............................3 PC
SPACER TUBE.......................................2 PCS
1624_OM_B.1
B-3