Description - MSA BADS Manual De Instrucciones

Description

2 Description
The cylinder cart for the MSA Breathing Air Distribution System (BADS) permits up to four NIOSH-approved
airline respirators to be connected to two (2) one hour 4500 psig breathing apparatus cylinders
(not included).
The cart may be used in a portable or stationary position. The system consists of:
Two wheel poly powder coated steel cart, two sets of double cylinder straps, airline hose rack, and
-
adjustable pull handle.
A 5500 psig pressure regulator to reduce the 4500 psig cylinder air to the proper air line respirator inlet
-
pressure.
A whistle to indicate low cylinder pressure.
-
A cylinder pressure gauge.
-
An outlet pressure gauge that operates in 0-125 psig range.
-
4-outlet manifold with 3/8" NPT to 1/4" NPT brass bushing.
-
Relief valve at 125 psig with manual pull ring.
-
Two cylinder pigtails with bleeder valves for disconnecting, CGA hand-tightening nuts, and a check valve
-
to prevent back flow. This prevents the air from moving between cylinders.
Four outlet fittings:
-
units can be ordered with MSA Union Adapters, P/N 69542, (male 3/4 inch –16 UNF going into a
-
1/4 NPT female manifold thread), to connect directly to MSA NIOSH-approved breathing hose or
MSA locking quick-disconnects and hose. See section on accessories. The union adapters can be
removed and replaced with any suitable fitting with a 1/4 inch NPT male thread. The manifold has
3/8" NPT to 1/4" NPT brass bushing. However, the union adapter is necessary to make connection
to MSA breathing hose.
units can be ordered with aluminum Snap-Tite quick-disconnect sockets, steel Foster quick-
-
disconnect sockets, and brass Hansen quick-disconnect sockets (see Replacement Parts list).
Type Breathing Air Connectors on Cart
Union Adapters
Snap-Tite Aluminum
Foster Steel
Hansen Brass
US
6
Cart Part No.
10107537
10107779
10107780
10107811
Breathing Air Distribution System