Ribind K 2007 Manual De Instrucciones página 22

G
B
POINT A -
J1
J2 AERIAL
LSC
LSO
COM
PED BUTT
J3 L-N
EARTH
J4
RADIO
J5
A+ TEST
J6
A+
A-
COM +
K BUTT.
PHOT.
EDGE
-
J7
U - MOTOR
V-W - MOTOR
PROBE
J8
r1 TRIMMER LOW SPEED
TRIMMER TORQUE
r2
ELECTrIC CONNECTIONs
R1
R2
DO NOT rEMOVE ANY JUMPEr!
OTHErWIsE THE OPErATOr WILL NOT WOrK!
Radio Antenna
Close limit-switch that cuts off the motor in closing
Open limit-switch that cuts off the motor in opening
Limit-switch common contact
Pedestrian opening contact (NO)
Main power supply 230 Vac 50/60 Hz (120V/60Hz upon request)
Connection of the earth line
Built-in radio module (model CRX),
or connector for radio receiver RIB, 24Vdc supply
24Vdc safety strip self-test power supply
Accessories power supply +24Vdc
Accessories power supply -24Vdc
Common contact (common line for all the command and safety inputs) (+)
Single pulse contact (NO)
Photocells contact (NC)
Safety strip contact (NC)
Buzzer contact (24Vdc max 200 mA) (-)
Flashing light (max 40W )
Motor common connection
Motor phase and capacitor connections
Temperature sensor cable connection PROBE (Code ACG4665 optional)
Electronic regulator for low speed on approach
Electronic torque regulator
J3
J1 J2 J5
22
22
J4
J7
J6
J8