Location Requirements - Dacor DTI30M Serie Instrucciones De Instalación

Parts included
6 screw
(M4 L10 2 ea,
M4 L16 2 ea,
UNC 24 / L75 2 ea)
3
16

Location requirements

IMPORTANT: Observe all governing codes and ordinances.
• Cabinet opening dimensions that are shown must be used.
Recessed installation area must provide complete enclosure around the recessed
portion of the cooktop.
• Grounded electrical supply is required. See "Electrical Requirements" section.
NOTE
It is recommended to install the juction box on right side of the cabinet.
If installing the junction box near the left side, make sure the junction box does not
interfere with the cooktop (by concealing the junction box inside the wall).
IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet
supplier to make sure that the materials used will not discolor, delaminate or sustain other
damage. This cooktop has been designed in accordance with the requirements of UL and
CSA International and complies with the maximum allowable wood cabinet temperatures
of 194 °F (90 °C).
NZ9500K_MOD_DTI30M977B_DG68-00898A-00_EN+MES+CFR.indb 7
Bracket Guide: 2 ea Foam tape
English 7
2017-04-05 3:02:28