Accessory Installation - WEG SCA06 Guía De Instalación, Configuración Y Operación

Encoder Input Expansion Module - EEN1

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the control module of the servo drive.
2. Remove the protective cover from the slot, as shown in figure 4.1.
Figure 4.1: Remove the protective cover
3. Connect the accessory to the appropriate slot, as shown in figure 4.2. Remember that the
accessory EEN1 can be connected to any available slot on the SCA06.
Figure 4.2: Accessory installation
8 | SCA06